 |
4 Wheel Active Steer
This light comes on while the engine is running. It may indicate that there is a malfunction with the 4 Wheel Active Steer portion
of the steering system. Push the ignition switch to the OFF position and then to the ON position. If the light remains lit after cycling the engine, have the system checked by an
Infiniti retailer. If there is a malfunction in the system, the 4 Wheel Active Steer function will cease but driving can be continued. However, the steering wheel is slightly turned
even when driving on a straight road. |
 |
Anti-Lock Braking System (Canada)
When
the ignition switch is turned on, this light illuminates to indicate that the system is operational. If the ABS warning light remains illuminated, it may indicate the ABS system is not
functioning properly. Have the system checked by your Infiniti technician. If an ABS malfunction occurs, the anti-lock function is turned off. The brake system still operates, but
without anti-lock assistance. |
 |
Anti-Lock Braking System (United States)
When
the ignition switch is turned on, this light illuminates to indicate that the system is operational. If the ABS warning light remains illuminated, it may indicate the ABS system is not
functioning properly. Have the system checked by your Infiniti technician. If an ABS malfunction occurs, the anti-lock function is turned off. The brake system still operates, but
without anti-lock assistance. |
 |
Supplemental Air Bag Warning
After turning on the
ignition, the supplemental air bag warning light will illuminate. In the event that any of the following conditions occur, the vehicle must be taken to an authorized dealer for
service: The supplemental air bag warning light stays on after seven seconds; The supplemental air bag warning light flashes intermittently; The supplemental air bag warning light does
not come on at all. Unless checked and repaired, the supplemental restraint systems may not function properly |
 |
Automatic
Transmission Position Indicator
When the ignition is turned on, the indicator shows the automatic selector shift position.
In manual shift mode, when the transmission does not shift to the selected gear due to the transmission protection mode, the AT position indicator light will blink and a chime will
sound. |
 |
All-Wheel Drive Warning
The All-Wheel Drive warning light comes on when
the ignition switch is pushed to ON. If the All-Wheel Drive system malfunctions, or the diameter of the rear wheels are different, the warning light will either stay illuminated or
blink. If the light comes on while driving, reduce your speed and have the vehicle checked by an Infiniti retailer as soon as possible. |
 |
Charge Battery Warning
If the light comes on while the engine is running, it may indicate the charging
system is not functioning properly. Turn the engine off and check the alternator belt. If the belt is loose, broken, missing or if the light remains on, see your Infiniti technician
immediately. Do not continue driving if the alternator belt is loose, broken, or missing. |
 |
Fog Light
Indicator
The front fog light indicator light illuminates when the front fog lights are on. |
 |
Brake Warning Light
This light functions for both the parking brake and foot brake systems. When the
ignition is turned on, this light illuminates to indicate that the system is operational. If the light comes on while the engine is running, stop the vehicle and check brake fluid
level. If brake fluid is necessary, add fluid and have the system checked buy an Infiniti technician. If the brake fluid level is correct, have the system checked by an Infiniti
technician. If both the parking brake is released and the brake fluid level is sufficient and both the ABS and brake warning lights come on, it may indicate the ABS system is not
operating properly. Have the system checked by an Infiniti technician as soon as possible. |
 |
Security Indicator
Light
The light blinks when the ignition switch is in the ACC, OFF or LOCK position. This function indicates the security
system equipped on the vehicle is operational. If the system is malfunctioning the light will remain lit. |
 |
Preview Function Warning (Orange)
This light comes on if there is a malfunction in the Intelligent Cruise Control system. If the light comes on, park the vehicle in a safe place,
restart the engine, resume driving, and set the ICC system again. If it is impossible to set the system, or if the light remains lit, have the vehicle checked at an Infinti
retailer. |
 |
Infiniti Brake Warning Light
This light functions for both the parking
brake and foot brake systems. When the ignition is turned on, this light illuminates to indicate that the system is operational. If the light comes on while the engine is running, stop
the vehicle and check brake fluid level. If brake fluid is necessary, add fluid and have the system checked buy an Infiniti technician. If the brake fluid level is correct, have the
system checked by an Infiniti technician. If both the parking brake is released and the brake fluid level is sufficient and both the ABS and brake warning lights come on, it may
indicate the ABS system is not operating properly. Have the system checked by an Infiniti technician as soon as possible. |
 |
High Beam
Indicator
This light comes on when the headlight high beam is on and goes out when the low beam is selected. |
 |
Intelligent Key Warning
When the ignition switch is turned on, this light comes on for about two seconds
then turns off. The light warns of a malfunction with the electrical steering lock system - if the light comes on while the engine is stopped, it may be impossible to free the steering
lock or to start the engine. If the light comes on while the engine is running, you can drive the vehicle, but contact your Infiniti technician as soon as possible. |
 |
Low Beam Indicator
The light comes on when the front park, side marker, tail and
license plate lights are on. |
 |
Engine Oil Pressure Warning
This
light warns of low oil pressure. If the light flickers or comes on during normal driving, pull off the road and into a safe area, stop the engine immediately, and call your Infiniti
technician. Continuing to drive despite the warning light can cause severe damage to the vehicle. Such damage is not covered by the warranty. Turn off the engine when it is safe to do
so, and contact Infiniti roadside assistance. |
 |
Front
Passenger Air Bag Status
The front passenger air bag status light located under the climate control will be lit and the
passenger front air bag will be off depending on how the seat is being used. |
 |
Automatic Transmission Position Indicator
When the ignition switch is pushed to the ON position, the
indicator shows the automatic selector position. In the manual shift mode, when the transmission does not shift to the selected gear due to a transmission protection mode, the AT
position indicator light will blink and a chime will sound. |
 |
Seat Belt Warning
The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition switch is pushed to the ON
position, and will remain illuminated until the driver's seat belt has been fastened. |
 |
Malfunction Indicator Light
If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission
control malfunction. If the malfunction indicator light is on steady, an emission control system malfunction has been detected. Check the fuel-filter cap if the loose fuel-filter cap
warning appears in the vehicle's display. If the fuel-filter cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The warning light should turn off
after a few driving trips. |
 |
Vehicle Dynamic Control Off Indicator
The light comes on then the vehicle dynamic control is turned off. This indicates that the vehicle dynamic control system and traction control system are not
operating. |
 |
Vehicle Dynamic Control Warning
The light will blink when the
Vehicle Dynamic Control or the traction control system is operating, notifying the driver that the vehicle is nearing its traction limits. If the vehicle dynamic control warning light
remains lit when the system is turned on, the fail-safe mode is operating and should be taken to an authorized retailer for service. |
 |
Low
Tire Pressure Warning
The light warns of low tire pressure or indicates that the tire pressure monitoring system is not
functioning properly. After the ignition switch is turned on, the light comes on for one second. If the vehicle is being driven with low tire pressure, the warning light will come on.
A CHECK TIRE PRESSURE warning also appears in the central display. You should stop and adjust the tire pressure to the recommended cold tire pressure level shown on the tire and
loading Information label. However, the light will not automatically go off. After the tire pressure is adjusted, the vehicle must be driven about 16 mph to activate the tire pressure
monitoring system and turn off the light. The CHECK TIRE PRESSURE warning light is active as long as the tire pressure warning light remains on. If the TPMS is not functioning
properly, the low tire pressure warning light will flash for approximately one minute when the engine is on, then remain on.
For more information and a video on how to
reset TPMS, visit our Tire Pressure Monitoring FAQ Page: Click here for video |
 |
Master Warning Light
When the master warning light is on, any of the following will be
on the vehicle's display: no key warning, low fuel warning, low washer fluid warning, parking brake release warning, door or trunk open warning, loose fuel cap warning, or a check tire
pressure warning. |
 |
Turn Signal/Hazard Indicator
The light flashes
when the turn signal switch or hazard switch is turned on. |
